Modular Desk Organiser — 3D Print System

The Modular Desk Organiser is a printable system for drawers and desktops. Bins and trays come in sizes that fit a 40 mm grid, so any combination tiles neatly, and two locating frames hold them in place so nothing slides around when a drawer opens.

Every part is a clean, watertight solid with 1.6 mm walls, a 1.2 mm floor and rounded corners, designed to print without supports in PLA or PETG.

• Desk drawers and workbenches
• Stationery, craft and electronics parts
• Makers selling organisers
• Anyone with a 3D printer and a messy drawer

• Bins in 1×1, 1×2 and 2×2 at 40 mm and 70 mm tall
• Low trays in 1×3 and 2×3
• 70 mm pen cup
• 3×3 and 2×4 locating frames
• Watertight solids that slice without repair
• Prints without supports

• 10 STL files at real size (mm)
• README with sizes and recommended print settings
• Licence

• PrusaSlicer, Cura, Bambu Studio, OrcaSlicer
• Any FDM printer with a 200 × 200 mm bed or larger
• Resin printers for the smaller parts

• A slicer that opens STL files
• PLA or PETG filament

1. Unzip the download and open an STL in your slicer

2. Parts are exported on the bed at real size in millimetres

3. Slice with the settings in the README (0.2 mm layers, 3 walls, 15% infill)

4. Print, remove from the bed and use — no supports needed unless the README says so

• Personal — Print for yourself, your home and gifts. Not for sale.
• Commercial — Sell physical prints you make yourself, up to 250 copies of each part.
• Agency — Sell unlimited physical prints you make, and print for clients.

No tier permits reselling or redistributing the files themselves.

Questions about Modular Desk Organiser are handled through your DistroSource account — open a support ticket from the order and include your order number.